• Molicel P26A 18650 Battery
    Quick View

    Molicel are for vaping, just ask them yourselves. They’re into safe batteries for vapers, and the offering we have for you goes above and beyond not just in safety, but in capacity and performance well above many of the other widely available cells in the market. Read on for more info!

    The P26A 18650 battery is top of the field in multiple categories. It carries a 2600mah typical capacity and a maximum continuous discharge of around 30A, smashing the world wide favourite cells previously holding their titles. You can also look forward to incredible operating temperatures, low internal resistance and is even somehow capable of up to six amps worth of charging (editor’s note: we wouldn’t recommend anything above two amps for an optimal cell lifecycle).

    Mooch himself says it: Mooch – Molicel P26A 2600mAh 18650. Don’t miss out on the next gen of power!

    Specs:

    • Rated Capacity: 2.6Ah (Typical), 2.5Ah (Minimum)
    • Rated Discharge: constant 0.52A discharge until 2.5V at 23C
    • Rated Charge: Limiting 2.6A and constant 4.2V charge for 1.5 hours or 50mA at 23C
    • Nominal Voltage: 3.6V
    • Shipping Voltage: >3.45V (approximate state of charge on arrival <30%)
    • Internal Resistance: ≤ 20mΩ (measured by AC impedance at 1kHz)
    • End of Charge Voltage: 4.20±0.05V
    • End of Discharge Voltage: 2.5V
    • Charging Time: approximately 90 minutes
    • Maximum Charging Current: 6A
    • Maximum Discharging Current: 35A (this is NOT continuous)
    • Operating Temperature:
      • Charging: 0~60C
      • Discharging: -40~60 oC
    • Storage Temperature: <35C, recommended <23C for long term storage

    What’s in the box:

    • 1 x Molicel P26A 18650 Battery

     

    Battery Safety: Vape Traders NZ chooses its suppliers very carefully and we have sourced these batteries directly with Molicel. However, all rechargeable batteries, regardless of where they come from, require responsible usage. Incorrect handling can lead to damaged hardware or serious injury.

    Before using any rechargeable battery, make sure you understand the risks and take proper precautions. Never leave charging batteries unattended, and always place the charging device on a stable fire-proof surface. Do not use any battery or battery charger that is damaged in any way, whether that damage is visible or internal. Always transport batteries in a non-conductive container, and ensure that batteries can’t come in contact with each other. Dispose of batteries in a safe and responsible manner. Contact your local council to find out what programs are in place to help you dispose of your batteries.

    Vape Traders NZ will not be held responsible or liable for any injury, damage, or defect, whether permanent or temporary, that may be caused by the improper use of batteries. It is your responsibility as an adult to understand what you’re doing, and to not do silly things.

    Molicel P26A 18650 Battery

    $12.95
    ( 0 reviews )
  • 0.60hm 1.20hm
    Quick View

    Geekvape Aegis Nano Replacement Pods are compatible only with the Geekvape Aegis Nano Pod Starter Kit.

    They are NOT compatible with any other Aegis or Geekvape branded product.

    Specs:

    • Capacity: 2ml
    • 0.6ohm: 20 – 25W
    • 1.2ohm: 11 – 14W

    What’s in the box:

    • 2 x Geekvape Aegis Nano Replacement Pods

    Geekvape – Aegis Nano Replacement Pod (2 Pack)

    $12.95
    ( 0 reviews )
  • Geekvape - Aegis Boost Pro Replacement Pod (1 Pod + 2 Coils)
    Quick View

    These pods are only compatible with the Drag S, Drag X, V.Suit and PnP Pod Tank

    Coils are not included, these replacement pods take Voopoo’s PnP Coils.

    Choose from:

    • Standard – 4.5mL capacity
    • Short – 2mL capacity

    What’s in the pack:

    • 2 x PnP Replacement Pods (no coils included)

    Voopoo – PnP Replacement Pods (2 Pack – no coils)

    $12.95
    ( 0 reviews )
  • Uwell
    Quick View

    The Innokin Sceptre Replacement Pod is compatible only with the Innokin Sceptre Pod Mod Starter Kit.

    Specs:

    • Capacity: 3ml
    • Sceptre MTL 1.2ohm Coil: 9 – 10W
    • Sceptre MTL Coil 0.65ohm: 10 – 12.5W
    • Sceptre RDL Mesh 0.5ohm Coil: 18 – 20W

    What’s in the box:

    Standard Edition:

    • 1 x Innokin Sceptre Replacement Pod
    • 1 x Sceptre MTL Coil 1.2ohm pre-installed
    • 1 x Spare Sceptre RDL Mesh 0.5ohm Coil

    MTL Edition:

    • 1 x Innokin Sceptre Replacement Pod
    • 1 x Sceptre MTL Coil 0.65 Ohm pre-installed
    • 1 x Spare Sceptre MTL Coil 0.65 Ohm

    Innokin – Sceptre Replacement Pod (1 Pack)

    $12.95
    ( 0 reviews )
  • Refillable Pods
    Quick View

    These replacement pods only for the Crown Pod Kit.

    The 1.0ohm coil is great for restrictive mouth to lung draws while the 0.6ohm pod is better suited to those that want more airflow.

    What’s in the box?

    2 x Crown Pod Cartridges (1.0ohm or 0.6ohm)

    Uwell – Crown Pod Cartridge (2 Pack)

    $14.95
    ( 0 reviews )
  • Uwell - Tripod Replacement Pods (4 Pack)
    Quick View

    This replacement pod is compatible only with the Uwell Zumwalt Pod System.

    Specs:

    • Capacity: 1.6ml
    • 1.2 ohm dual coil
    • Magnetic pod connection

    What’s in the box:

    • 2 x Uwell Zumwalt Replacement Pods

    Uwell – Zumwalt Replacement Pod (2 Pack)

    $14.95
    ( 0 reviews )
  • uwell
    Quick View

    Replacement Pod for the Uwell Amulet Pod System. 1.6 ohm.

     

    Warning: As the Amulet pods are made of polycarbonate, we suggest avoiding strong citrus flavoured e-liquids with this device as they may cause your pods to crack.

    Uwell – Amulet Replacement Pod (2 Pack)

    $14.95
    ( 0 reviews )
  • Vaporesso - Swag PX80 Replacement Pod (2 Pack)
    Quick View

    These replacement pods are compatible only with the Kroma Z Pod Mod Kit.

    Specs:

    • 4.5ml capacity
    • Innokin Z Coil compatible
    • Side fill with silicone plug

    What’s in the box:

    • 1 x Kroma Z Replacement Pod
    • 1 x 0.3 ohm Z Coil Replacement Coil
    • 1 x 0.8 ohm Z Coil Replacement Coil

    Innokin – Kroma Z Replacement Pod (1 Pack)

    $14.95
    ( 0 reviews )
  • Endura M18 POD -4ml
    Quick View

    These pods are compatible with the Innokin Endura M18 Starter Kit only.

    Specs:

    • Resistance: 1.6 ohm
    • Capacity: 4ml

    What’s in the box:

    • 1 x Innokin M18 Replacement Pod
    • 1 x Innokin Endura M18 1.6 ohm Coil

    Innokin – Endura M18 Replacement Pod (1 Pack)

    $14.95
    ( 0 reviews )
  • MOLICE 092 2I815 01
    Quick View

    Molicel are for vaping, just ask them yourselves. They’re into safe batteries for vapers, and the offering we have for you goes above and beyond not just in safety, but in capacity and performance well above many of the other widely available cells in the market. Read on for more info!

    The Molicel P42A 21700 battery is a top tier battery, beating even the current purple-wrapped king. It carries a typical 4100mah capacity and offers a continuous discharge rating of 30A (40A in cooler conditions, but stay safe out there). As you’d expect from a top level producer of quality like Moli, the P42A has a super low resistance, quick charging time and peak pulse discharging of up to 45A.

    Basically, if you own a mech, you NEED to try these. After the excellent 20700 cells all around the world, the P42A is a best in show 21700. Check out Mooch’s review here, of “one of the best batteries available”.

    Specs:

    • Rated Capacity: 4.0Ah (Minimum), 4.1Ah (Typical)
    • Rated Charge: Limiting 4.2A and constant 4.2V charge for 1.5 hours or 50mA at 23C.
    • Rated Discharge: constant 0.84A discharge until 2.5V at 23C
    • Nominal Voltage 3.6V
    • Shipping Voltage: >3.45V (approximate state of charge on arrival <30%)
    • Internal Resistance: <15mΩ (measured by AC impedance at 1kHz)
    • End of Charge Voltage: 4.20±0.05V
    • End of Discharge Voltage: 2.5V
    • Charging Time: approximately 90 minutes
    • Maximum Charging Current: 8.4A
    • Maximum Discharging Current: 45A (this is NOT continuous)
    • Operating Temperature:
      • Charging: -20~60C
      • Discharging: -40~60C
    • Storage Temperature: <35C, recommended <23C for long term storage

    What’s in the box:

    • 1 x Molicel P42A 21700 Battery

     

    Battery Safety: Vape Traders NZ chooses its suppliers very carefully and we have sourced these batteries directly with Molicel. However, all rechargeable batteries, regardless of where they come from, require responsible usage. Incorrect handling can lead to damaged hardware or serious injury.

    Before using any rechargeable battery, make sure you understand the risks and take proper precautions. Never leave charging batteries unattended, and always place the charging device on a stable fire-proof surface. Do not use any battery or battery charger that is damaged in any way, whether that damage is visible or internal. Always transport batteries in a non-conductive container, and ensure that batteries can’t come in contact with each other. Dispose of batteries in a safe and responsible manner. Contact your local council to find out what programs are in place to help you dispose of your batteries.

    Vape Traders NZ will not be held responsible or liable for any injury, damage, or defect, whether permanent or temporary, that may be caused by the improper use of batteries. It is your responsibility as an adult to understand what you’re doing, and to not do silly things.

    Molicel P42A 21700 Battery

    $15.95
    ( 0 reviews )
  • Geekvape - Aegis Boost Pro Replacement Pod (1 Pod + 2 Coils)
    Quick View

    This replacement pod is compatible only with the Geekvape Aegis Boost Pod Starter Kit.

    It is NOT compatible with the Aegis Boost Plus.

    Specs:

    • Capacity: 3.7ml

    What’s in the box:

    Your choice between:

    • 1 Pod (with coils)
      • 1 x Geekvape Aegis Boost Replacement Pod
      • 1 x Mesh 0.6ohm: 15 – 25W
      • 1 x Mesh 0.4ohm: 25 – 33W
    • 2 Pods (no coils)
      • 2 x Geekvape Aegis Boost Replacement Pod

    Geekvape – Aegis Boost Replacement Pod

    $15.95
    ( 0 reviews )
  • Quick View

    Geekvape Wenax K1 Replacement Pods are compatible only with the Geekvape Wenax K1 – they are not compatible with the Wenax Stylus or Wenax C1.

    Specs:

    • Capacity of 2ml
    • Resistance of 0.8 ohm or 1.2 ohm

    What’s in the box:

    • 4x Geekvape Wenax K1 Replacement Pods in your choice of resistance.

    Geekvape – Wenax K1 Replacement Pod (4 Pack)

    $16.95
    ( 0 reviews )